Speaker Cable

You are here: Home > Speaker Cable

Sort By:

Page of 1

Nakamichi Banana Plugs

8' Speaker Cable Plus Pair

Our Price: $7.99
Sale Price: $6.99
You Save $1.00

Our Price: $24.95
Sale Price: $19.95
You Save $5.00

We love these Nakamichi Banana Plugs! They're priced right, and you won't find a better connector for your speakers. You can spend five times as much, and get a lesser connector. They're gold plated, fit snugly into our amps, and your speakers, they're easy to assemble, and nice looking too. At each plug there are dual anchor screws to insure perfect contact with you speaker wire. We recommend that you tin the ends of your speaker wires, but even if you don't solder, the dual anchor screws have got you covered! Just twist the wires nice and tight and crank down on the screws with a small screwdriver! The Nakamichi Banana Plugs are priced per set of 4. So...if you use Banana plugs at both ends of your speaker wires, you'll need to order 2 sets of four. If, however, your speakers require spades or simple clamp downs, then you can build two speaker wires with just one set of our Banana Plugs. All of our amps take Banana Plugs. We highly recommend the use of Banana Plugs for best performance, portability, and ease of use. Buy some for your T-Amp, and while you're at it, grab some extra sets to replace the poor quality connectors on your theater system! You can purchase the connectors and order speaker wire by the foot from us if you prefer to make your own wires in custom lengths.

High performance speaker cables at a reasonable price. Our 8' speaker cable pair is a perfect match for T-Amp 10 and T-Amp 20. This cable pair features high quality wire, with gold plated Nakamichi banana plugs on both ends. Wire is 18 gauge which is more than adequate to handle the power of these amps, yet can be concealed elegantly. Please spend that extra $100 on some efficient speakers, not on the cables! The moderate length cable pair is perfect for smaller rooms with bookshelf speakers without concern for coiling up excess wire. Ends are hand tinned for perfect contact with the banana plugs and zero loss of audio quality. If your application requires custom length cables, simply order by the foot and assemble yourself or have us do it for you. We're glad to help. NOTE: Although blue wire is pictured, our current offering has clear housing.

Labor, cut wires, install ends

Monster XP Speaker Cable by the foot

Our Price: $6.00

Our Price: $0.99

If you'd like us to install your purchased Nakamichi banana plugs to your purchased speaker cable by the foot, you'll need to purchase this labor option. We cut the wires to your specified lengths (we'll cut your ordered wire in half to make two equal length cables if you don't specify lengths in the checkout message area), strip and tin the ends, then install the banana plugs. If you want one end of your speaker wires bare, simply purchase just one set of banana plugs, and we'll figure it out.

Monster XP Speaker Cable is a superior quality product for ultra high performance. Our cable comes in Navajo White, and offers outstanding sonic performance at an attractive price. It features a Patented Magnetic Flux Tube for greater dynamic range. It also has LPE Dielectric insulation around the conductors reducing signal loss for greater clarity. If you're looking for ultra high quality speaker cable, look no further than Monster XP! Our Nakamichi Banana Plugs are a perfect match for use with the Monster XP cable. Priced per foot. Your quantity ordered is your length of cable in feet. Remember to order double the length you need for one cable to make a pair, i.e. if you want 10' cables, your quantity would be 20. If you purchase cable and ends from us, we can make your cables for you if you desire for a labor charge of just $6. Simply add the LA01 labor option to your order in the Speaker Cable product area. If we don't receive any specific instructions, we'll cut your length of wire in half and make two cables. If you want asymmetrical lengths, just let us know in the message box area on the checkout page.

Monster XP 9' Speaker Cable Pair

Our Price: $34.95

Ultra High performance speaker cables at a reasonable price. Our 9' Monster Cable XP speaker cable pair is a perfect match for our T-Amp 90 or any other 100 Watt plus amplifier. It also serves as a no-compromise speaker cable pair for our T-Amp 10 and T-Amp 20. This wire pair features Monster XP cable, with a patented magnetic flux tube which breaks up internal magnetic fields for greater dynamic range, as well as LPE Dielectric insulation around the conductors, which reduces signal loss for greater clarity. They ship with gold plated Nakamichi banana plugs on both ends. You'll be hard pressed to find speaker cable pair of this quality for under $80! The 9' length cable pair is perfect for most applications, however if you need shorter, longer, or asymmetrical cables, simply order our bulk Monster Cable XP, Nakamichi ends, and the labor option if you'd like us to assemble your cables for you so you're ready to plug and play. Ends are hand tinned for perfect contact with the banana plugs and zero loss of audio quality.